! This product is not available in the US-market !

CSU Module – Intermediate Stripper

Introduction

The CSU module is the new generation of intermediate stripper.

The cutting head and other components were completely redesigned, resulting in improved accessibility and simpler and faster conversion.

Picture:
1|
2

Zoom

Key features:

Reliable intermediate stripping technology
Improved cutting head
Better monitoring of the process thanks to the transparent safety cover
Reliable and neat cut-out of insulation
Superb ease of operation
Ultra short conversion times

Function

The CSU module is utilized as a preliminary station to the Komax fully automatic crimping machines and for intermediate stripping of stranded wires.

With the CSU module, insulation is always stripped reliably and neatly. Operation is fast and simple, as is the procedure for changing to a different wire size.

Quality

Prerequisites for top quality intermediate stripping:

Good quality intermediate stripping depends mainly on factors like wire size, wire tolerance, insulation thickness, stripping length, etc. The thinner a wire, the shorter the maximum possible stripping length.

Dimensional accuracy is particularly important with thin-walled wires. If the wire is not dimensionally true, the insulation might not be able to be fully removed or the strands/cores might be damaged.

Insulation thickness and hardness are also crucial factors for the quality of insulation removal in intermediate stripping.

With thicker and harder types of insulation, stripping is easy and neat, because the insulation does not yield while being cut.

Technical data

Electrical connections	240VAC/50Hz
Compressed air	5–8bar
Wire cross section	0.5mm2–10mm2
Intermediate stripping length	5mm–38mm
Isolation	PVC or the like
Cycle time	approx. 0.5s/cycle

Electrical connections

240VAC/50Hz

Compressed air

5–8bar

Wire cross section

0.5mm2–10mm2

Intermediate stripping length

5mm–38mm

Isolation

PVC or the like

Cycle time

approx. 0.5s/cycle

Important

Up to 10m of sample wire is needed in order to determine whether a wire can be processed. The tolerance figures for processing must also be indicated. Approx. 50m of test wire is required with the order.

For more information please contact:

Komax Corporation
1100, East Corp.
Grove Drive
Buffalo Grove, IL 60089-4507

Tel. +1 / 847 537 6640
Fax +1 / 847 537 5751
mailto: Komax Corporation
Internet: http://www.komaxusa.com