mci 711/721 - Top crimping performance

The two crimping modules mci 711 and mci 721 guarantee an optimum bond between wire and terminal - excellent crimping.

Efficient, user-friendly operation is ensured by intelligent communication between the presses and the basic machine. A crimp force sensor is integrated as a standard feature in both presses.

With the mci 721, the crimping height is also programmable.

The two crimping modules mci 711 and mci 721 are ideal processing stations for all Komax fully automatic crimping machines. They can be integrated seamlessly into the entire range of basic machines.

The maximum crimp force is 20kN. Wires up to 6mm² can be crimped.

The layout of both modules permits the use of all common commercial applicators.

With the mci 721 crimping module, the crimping height can be programmed in TopWin, enabling ultra short conversion times. The module is powered by a brushless servomotor that sets new stand-ards. A built-in linear measuring system allows fine positioning of the press carriage in 0.01mm increments. All parameters for the mci721 are set in the TopWin software.Both presses, the mci 711 and mci721, are identical in construc-tion from a mechanical standpoint. Both have an MCI interface. All options can be used on either of the presses.

Both modules feature integrated crimp force monitoring in the form of a CFA (Crimp Force Analyzer). Two built-in piezo-ceramic sensors act as the pickup units. The 3-zone analysis ensures extremely reliable good/bad detection with detailed error information. The crimp curve is displayed on a graph on the OMI.

On the mci 721, the crimp force is depicted as a function of the tool movement.

A certified calibration tool for absolute force calibration is available for both presses. CFA testing equipment is available as an accessory for periodic testing of the press and the CFA.

Die Crimpmodule mci 711 und mci 721 lassen sich benutzerfreundlich über die TopWin-Software einstellen. Das OMI (Operator Machine Interface) mit nur zwei Tasten und einem digitalen Potentiometer garantiert höchsten Bedienkomfort. Modul, Zubehör, die integrierte Crimpkraftüberwachung, sowie Spezialfunktionen wie Doppelhub, Kriechgangmodus usw. sind über das OMI bedienbar. Die Anzeige der Menüs erfolgen wahlweise in sieben Sprachen.

Die Werkzeug-Schnellspannvorrichtung sorgt für ein sehr rasches und bequemes Wechseln der jeweiligen Werkzeuge auf dem Modul.