Send page
Print this page
Disclaimer
ImprintKA 3000 / 6000
Introduction
These wire deposit units are intended for depositing “over-length conductors” neatly and extended to full length.
The KA 3000 deposit unit is suitable for depositing wires up to about 3000mm in length; the KA 6000, for depositing wires up to about 6200mm in length. The maximum wire diameters for the two models are 18mm and 35 mm, respectively. With the KA 3000-2 model, two separate batches can be deposited in separate trays.
Technical data
| KA 3000 | KA 6000 | |
|---|---|---|
| Conductor diameter | max. 18mm | max. 35mm |
| Conductor length | 350-3000mm | 350-6200mm |
| RPM of turntable / speed | max. 310min-1 | max. 133min-1 |
| Electrical connection | 230V, 50/60Hz | 230V, 50/60Hz |
| Compressed air connection | 6bar | 6bar |
| Dimensions (WxHxD) | 3900x1250x700mm | 7070x1250x700mm |
| Weight | approx. 115kg | approx.. 230kg |
Use
| KA 3000 | KA 6000 | |
|---|---|---|
| K 206 / 206-S | x |
x |
| Kappa 210 | x |
x |
| Kappa 220 | x |
x |
| Kappa 225 | x |
x |
| Kappa 235 | x |
x |
| Kappa 240 | x |
x |
| Kappa 330 | ||
| Kappa 350 |
For more information please contact:
Komax Corporation
1100, East Corp.
Grove Drive
Buffalo Grove, IL 60089-4507
1100, East Corp.
Grove Drive
Buffalo Grove, IL 60089-4507
Tel. +1 / 847 537 6640
Fax +1 / 847 537 5751
mailto: Komax Corporation
Internet: http://www.komaxusa.com
Fax +1 / 847 537 5751
mailto: Komax Corporation
Internet: http://www.komaxusa.com