Crimp Module Analyzer

Introduction

The Komax Crimp Module Analyzer tests the functionality and quality of the Komax crimp presses. This piece of test equipment is usable on all Komax presses (MCI, BT). It enables the early detection of errors in production and assures reliable press stability.

Picture:
1|
2|
3

Zoom

Key features:

Usable on all Komax presses (MCI, BT)
Measured results of stroke stability STSA in µm
Functional test of the CFA system
Short test times
Clear summary report, including graphics
Simulator is checked to ensure it is operating

Next >>

Function

When teamed up with the well-designed Komax software, the crimp simulator allows the stability of the press stroke (STSA Stroke Stability Analysis) to be indicated in μm. The Komax CFA (Crimp Force Analysis) is monitored for correct functioning. The stability of the press is checked using a two-stage force simulator.

Clear summary report

When the measurements are finished, you can have a report generated and printed out. You can also save the measured values and reload them again later.

<< Previous | Next >>

Requirement

To carry out the tests, you need a PC or laptop with a Windows® 2000 or XP operating system and a serial interface (COM port, RS232).To ensure the accuracy of the testing equipment, you must send the test case in to Komax in Switzerland once a year for recertification.

<< Previous | Next >>