Xcell 3400
Introduction
New to the Xcell 3400 is the innovative solder head characterized by non-metallic ceramic hold-down pins and non contact closed loop thermal feedback. This feature allows more control over various aspects of the soldering cycle including ramp-up time, set-point temperature, soak time (time at set-point), and cool down delta yielding a dramatic increase in the solder bond consistency and quality. Our innovative spray fluxing method accurately applies just the right amount of flux to the top and/or bottom of the cell for superior soldering results. Ribbon straightness and accuracy is assured by the “advanced patented ribbon control" technique of holding both ends of the ribbon.
Key features:
- Handles cells from 100 mm x 100 mm to 156 mm x 156 mm both with 2 and 3 ribbons. The Xcell can also handle half cells 156 x 78 mm
- Strings 600 cells per hour
- Less contamination of cell with non contact fluxing method
- Closed loop soldering control
- Standard cell pre-heating which reduces thermal stresses during soldering.
- Top-Control operators software with graphical assistance
- Advanced ribbon control provides superior ribbon alignment – even with badly cambered ribbon!
Function
The Xcell 3400 with its innovative soldering head embodies all of the features which have made our previous stringer machines industry leading products. Firmly rooted in proven technology the Xcell 3400 is the next generation of our automated stringer product line. Capable of processing all traditional mono- and polycrystalline solar cells up to 156 mm², with 2 or 3 busbars and a maximum throughput rate of 600 cells per hour, the Xcell truly is the perfect fit for your cell stringing needs. The compact design allows for a smaller overall factory footprint and can be integrated with any of our standard cell offloading products including direct string transfer to a 1 x 2 m glass.
Technicala data
| Solar Cell Range | 100 mm - 156 mm Square and Pseudo Sqare (Standard) 156 x 78 mm Half Cells |
|---|---|
| Number of Interconnect Ribbons | 2 - 3 |
| Interconnect Ribbons Spacing | 41.5 mm (Minimum) 76.5 mm (Maximum) |
| Solar Cell Spacing | (Solar Cell Size Dependent) 2.0 mm (Minimum) 40 mm (Мaximum) |
| String Length | 100 mm - 2000 mm |
| Маximum Throughput (Peak) | 600 cells/hour |
| Noise Level | <72 dBA |
| Electrical Connection | 3 x 208 - 480 В / 50 - 60 Hz |
| Сompressed Air | 5 - 6 bar (72 - 87 psi) |
| Air Consumption | 22 m3/h |
| Weight | 1200 kg |
For more information please contact:
Komax Solar Inc.
Solar Business
20 Innovation Drive
US-York, PA 17402
20 Innovation Drive
US-York, PA 17402
| phone: | +1 / 717 755 6800 |
| fax: | +1 / 717 757 6470 |
| mailto: | Komax Solar York |
| Directions | |
| From MDT | Harrisburg Int'l Airport |
| From BWI | BWI Airport, Baltimore MD |
| From IAD | Washington DC Airport |
| From PHL | Philadelphia Int'l Airport |
| Internet: | http://www.komaxsolar.com |